Case Study: My Experience With Wood

A Guide to Wood Science

The study of wood as a renewable material and organic material is what is known as wood science. Wood technology is now the way the tools are utilized in the processes of wood preservation. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

For your wooden products and house to stay for long and have a good appearance it needs to be protected. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. As the name implies the preservative is made of copper products. As effective as this preservative, it has some downside to its use. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. An alternative name to be given to this method is the micronized copper wood preservative method. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.

Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. It is not corrosive to metals used in together with the product. When you use this method to treat wood, then you will not need to worry for at least ten years.